Search Title

×

Do you know that your internet browser is out of date?

Your browser is out of date, and may not be compatible with our website.

Please use IE11, or download the latest version of Chrome, Firefox or Edge.

Close This Window

By closing this window you acknowledge that your experience on this website may be degraded.

Lightweight communication transceiver provides superior two-way AM voice communications

$88,045 USD*

Compact, lightweight and affordable, the BendixKing KTR 909B UHF Communication Transceiver offers the flexibility to meet your specific communications needs. Providing superior two-way AM voice communications, this unit was specifically designed for international governmental, military and paramilitary applications, and have already been specified for use in U.S. Air Force and U.S. Navy training programs.

This all-solid-state unit accesses frequencies from 225.000 to 399.975 MHz in 25 kHz increments, and is specifically designed for low maintenance and high reliability. The KTR 909B offers full-time guard frequency (243.000 MHz) monitoring via a dedicated second receiver, while the KTR 909 scans other frequencies when the unit is not in use.

The KTR 909B incorporates an ARINC 429 bus interface that can allow control from an FMS, Radio Management Unit (RMU), or Integrated Avionics System. The KFS 599B can be used as the primary controller, or as a back-up controller. The KFS 599B features 20 user programmable channels and standard easy-to-read, gas-discharge displays or a Night Vision Goggle (NVG) compatible display.  
 
Manual Frequency Selection
The Manual Frequency display mode is selected by momentarily depressing the Channel Mode select button. In this mode, the upper line of the frequency display is blank while the lower line displays the operating frequency. The frequency may be changed by rotating the concentric selector knobs, thus allowing direct entry of the desired frequency.
 
Preset Channel Selection
The Preset Channel display mode is selected by momentarily depressing the Channel Mode select button. In this mode, the upper line of the frequency display indicates the preset channel number. Twenty user- programmable channels are available for quick access to commonly used frequencies. The guard channel is also available for transmission and reception in this mode. Preset channels may be changed by rotating either of the concentric selector knobs.
 
ADF Mode
The KTR 909B can provide tuning for remote ADF systems. The ADF mode is selected by pressing the Receiver Mode Select button. The UHF transmitter is then disabled and the signal received by the KTR 909B is directed to the external ADF processor.  When the ADF Mode is enabled and active, the MN annunciator is illuminated and the letters ADF appear in either the frequency display (when preset/guard mode is active) or the channel
display (when manual frequency mode is active). During ADF operation, the guard receiver is not active.
 
Remote Channel Mode Select
A remote-mounted switch may be installed to toggle both the KFS 599B between Manual Frequency display and Preset Channel display modes.
 
Remote Channel Increment
A remote-mounted switch may be installed to place the KFS 599B in the Preset Channel display mode and incrementally scan through the channels. Operating this switch will advance the preset channel number by one count.
 
Receiver Mode Selection
The KTR 909B receiver can monitor either the main or guard frequencies, or can monitor both simultaneously. The receiver mode is selected by momentarily depressing the Receiver Mode select button. Receiver modes are annunciated in the display’s upper right hand corner and indicator, providing full ADF capability throughout the associated UHF band.
 
Transmitter “Push Tone”
When the transmitter is keyed and the inner Frequency Selector knob is depressed, the transmitter will transmit a 1000 Hz tone.
 
Stuck-Mic Protection
When a microphone is keyed for more than 90 seconds, the control unit reverts to receive mode and the display flashes, alerting the pilot to a stuck-microphone condition. This prevents the radio from jamming the selected frequency.
 
Configuration Options
This installation option for the KTR 909B permits an FMS to control the system, with the KFS 599B used as a backup controller. Ideal for training purposes, this tandem installation permits either the KTR 909B or KTR 909 system to be managed via two control heads.
 
FMS Control Head Option Tandem Control Head Option Flight Management System Control
With its ARINC 429 interface, the KTR 909B may be controlled through an FMS. The KFS 599B may be installed as a backup controller for an FMS, but simultaneous FMS and KFS 599B operations are not supported.
 
Tandem Control Head Operation
Dual control units can be installed for tandem operation of either the KTR 909 or KTR 909B, where one unit is designated the master and one is the slave.
 
In tandem operations, only those pre s e t channels stored in the master control unit are available to the slave unit. A Control - Disable feature allows the installation of tandem KFS 599A/B units so that data entries may be made from either controller.
 
Support
As with all of our products, the KTR 909 and 909B are backed by our comprehensive 2-year “no-hassle” warranty and supported by a comprehensive worldwide dealer network.

Specifications
Environmental RTCA DO160C ENV CAT (909B) A2D2/A/MNB/E XXXXXZBABA/TR/AZ XXE3/XX
Temperature Range -55ºC to +55ºC
Altitude Range Up to 55,000 ft.
Physical Dimensions
Height 5.00 in. (12.70 cm)
Width 2.64 in. (6.71 cm)
Length 10.93 in. (27.76 cm)
Weight 4.8 lbs. (2.17 kg)
Power Consumption
Receive 27.5 V dc at 1.0 A max.
Transmit 27.5 V dc at 10.0 A max.
Frequency Range 225 MHz to 399.975 MHz in 25 kHz increments
Transmitter Power Output NLT 8 W (10 W Nominal) all frequencies. (25ºC)
Duty Cycle 4:1 (4 min receive – 1 min transmit)
Modulation Capability NLT 85% and NMT 98%
Sidetone Output Up to 100 mW into 500 Ohm load (adjustable)
Harmonic Content Greater than 55 dB down from carrier level
Spurious Outputs N LT 60 dB below carrier level
Microphone Dynamic with transistorized preamp or carbon 120 mVRMS into 100 Ohm load
Main Receiver Sensitivity 3μV for NLT 6 dB signal plus noise-to-noise with 1000 Hz. (6μV wide band)
Selectivity: (Narrow Band) -6 dB bandwidth NLT 25 kHz with N LT 12 kHz on one side
-50 dB bandwidth NMT 50 kHz with NMT 27 kHz on one side
Selectivity: (Wide Band) -6 dB bandwidth NLT 70 kHz with N LT 33 kHz on one side
-60 dB bandwidth NMT 145 kHz with NMT 75 kHz on one side
Standard Audio Output N LT 100 mW into 500 ohm load
Standard Audio Response NMT 6 dB variation from 350 to 2500 Hz
Wide Band Audio Output N LT 2.75 VRMS into 600 ohm band; balanced, unsquelched output
Wide Band Audio Response NMT 6 dB variation from 70 to 25.000 Hz
AGC Characteristics 5 μV to 200 mV for audio level change of less than 3 dB
Squelch Automatic squelch (internally adjustable carrier to noise) with manual disable squelch override
Spurious Responses and Cross Modulation Products At least 70 dB down
Image Response At least 60 dB down
3rd Order IM At least 60 dB down
Guard Receiver
Sensitivity Same as Main Receiver but with no wide band
AGC Same as Main Receiver
Squelch Same as Main Receiver but with no manual override
KFS 599B Control Head
Environmental (KFS 599B) RTCA DO160C ENV CAT A1D1/A/SPB/XXXXXXZBABA T/RAXXEZ
Temperature Range -20ºC to + 55 º C
Physical Dimensions
Width 2.19 in. (5.56 cm)
Height 2.35 in. (5.97 cm)
Depth 5.50 in. (13.97 cm)
Weight 1.10 lbs. (0.50 kg)
Frequency Range 225 MHz to 399.975 MHz in 25 kHz increments
Power Consumption Power supplied by KTR 909B
Lighting 5 V dc at 200 mA max. Available with and without volume control

*Prices listed are manufacturer’s suggested retail prices (MSRP).  Actual price is determined by BendixKing’s authorized dealers and may vary depending on, among other things, country, region, installation costs and any additional parts that may be required.  For more complete pricing information, please contact an authorized BendixKing dealer.